Mitsubishi Hyper-Heat vs Standard Mitsubishi Heat Pumps
Mitsubishi Hyper-Heat keeps heating to -13°F, and standard models cost less. See which Minnesota rooms need it; our ductless installs run $4,200–$12,500.
Read the guide
Ductless mini-splits in Oak Park Heights homes cost about $4,200–$12,500 installed, from a single room to several zones, quoted flat-rate in writing. They suit 1960s houses built without central air and any room the existing ducts never reached.
Adding central air to a 1960s Oak Park Heights house means finding a path for a coil and a trunk line through a house that was never designed for either. A mini-split skips that. One indoor head on an exterior wall, a small line set through the siding and an outdoor unit is often all it takes to cool the main living area, with heat from the same head in spring and fall.
Household size matters here too. Many Oak Park Heights households are one or two people, and heating or cooling every bedroom for them is a waste. A head in the room you actually use, with the furnace handling the rest, can make more sense than a whole new duct system. On 1970s and 80s houses, ductless also suits a finished lower level or an addition that the furnace never warmed well.
Updated October 27, 2026
Our $4,200–$12,500 installed price comes as a written flat-rate quote, with a 2-year labor warranty on top of the manufacturer's parts warranty. A 1960s house without central air can get one head on an exterior wall for the main living area, which costs less than finding duct paths. Compare central AC vs ductless costs.
Xcel's heat pump rebates can require a registered contractor, so ask whether yours does before choosing a heat pump. Rebate programs change every year, so check the utility's current terms before you buy.
Our guides: Xcel and CenterPoint rebates, heat pump rebates.
One head will cool the room it sits in and some of the space around it. Bedrooms behind closed doors usually need their own head. For a small house with an open plan, one or two heads can handle most of it. We map the floor plan and give you a written quote for the number of heads that fits.
It can be. A single head for the living room or bedroom you use most keeps that space comfortable without running the furnace and AC for empty rooms. If you plan to stay and use more of the house over time, we can size the outdoor unit so another head can be added later.
Mitsubishi Hyper-Heat keeps heating to -13°F, and standard models cost less. See which Minnesota rooms need it; our ductless installs run $4,200–$12,500.
Read the guideA ductless heat pump usually beats electric baseboard in a Minnesota house. We install them for $4,200–$12,500 and keep the baseboards as backup.
Read the guideHVAC zoning gives each floor its own thermostat and motorized dampers on one furnace and AC. HomeGuide puts a 2–3 zone retrofit at $1,700–$3,500 nationally.
Read the guideHeat out? AC quit? Call or send a request.