Open 7 days, 7am–9pm

Serving Minneapolis, Saint Paul & 50 miles around

Heating & Cooling in Edina, MN

Central Minnesota Heating and Cooling repairs and replaces furnaces, ACs, heat pumps and boilers in Edina (Hennepin County), about 7 miles from downtown Minneapolis.

Request Service

We'll get back to you about this request only. Rather talk now? Call 612-429-3465.

HVAC service in Edina, MN

Edina holds the 1924 Country Club District, one of Minnesota's first planned neighborhoods, and the streetcar-era bungalows of Morningside, surrounded by postwar ramblers and a steady run of teardown rebuilds.

County
Hennepin County
ZIP codes
55410, 55416, 55424, 55435, 55436, 55439
Natural gas
CenterPoint Energy
Electric
Xcel Energy
From downtown Minneapolis
about 7 miles

Updated October 27, 2026 · By , owner, Central Minnesota Heating and Cooling

Map of Edina, MNOpen in Google Maps
Technician with a flashlight checking the circuit breaker panel in a home's garage

What HVAC work do we do most in Edina?

  • Low-sound condenser placement on close lot lines in the Country Club District and Morningside
  • Two-system and zoned installs in rebuilt homes
  • Furnace and AC replacements in tight 1920s and 30s basements
  • Whole-home humidifiers set to Minnesota winter limits in plaster-wall houses

Around town: 50th & France · Southdale Center · Centennial Lakes Park · Braemar Park · Minnehaha Creek. Neighborhoods: Country Club District · Morningside · Parkwood Knolls · Rolling Green

Book in Edina

What are Edina homes like to heat and cool?

Edina's oldest houses are in its northeast corner. Morningside was platted in 1905 on the old Grimes farm and orchard, and several hundred houses, many of them bungalows, went up there by about 1936; it was a separate village from 1920 until it rejoined Edina in 1966. The Country Club District, platted in 1924, filled with Tudors and Colonial Revival houses by 1941. Most of these homes started on coal-fired gravity air or hot water, and today many pair a modern furnace with the original large ducts or keep a boiler and add cooling separately.

After the war, Edina spread south and west with ramblers and split-levels, and with larger custom homes on bigger lots in neighborhoods such as Parkwood Knolls and Rolling Green. The houses now replacing many postwar homes are built to current energy code, with tight walls, mechanical ventilation and often a second system for the upper floor. One Edina street can hold a 1920s house on its original ductwork beside a new build with zoned heat.

What goes wrong with heating in Edina in winter?

Edina's older houses hold heat poorly by modern standards. Many Country Club District and Morningside homes were built with little or no wall insulation, so even a correctly sized furnace runs long in a cold snap. Plaster walls and old windows also mean humidity has to stay modest in winter, or frost forms on the glass and moisture works into the walls. In the rebuilt houses, the typical calls are PVC vents drifted over and condensate lines frozen where they leave the house.

Furnace repair in Edina

What goes wrong with cooling in Edina in summer?

Upper floors in Edina's Tudors and bungalows sit under steep roofs with small ducts or none, and by late afternoon they're the hottest rooms in the older neighborhoods. Minnehaha Creek runs through northern Edina, and houses near it can carry basement humidity through the summer. On the rebuilt lots, two condensers often sit side by side along a narrow side yard; spacing them so they don't feed each other hot air helps both last.

AC repair in Edina

Which utilities and rebates apply in Edina?

CenterPoint's heating rebates cover high-efficiency boilers as well as furnaces, useful for older houses that still heat with hot water, and you can use the dealer of your choice. Xcel's heat pump rebates, including cold-climate mini-splits for upstairs rooms without ducts, work through its Trade Partner Network, so ask whether the rebate needs a registered contractor. Minnesota's HEAR and HOMES rebates had not launched as of mid-2026, so don't plan around them yet.

Rebate programs change every year; check the utility's current terms before you buy. Our guides: Xcel and CenterPoint rebates, heat pump rebates, what happened to the federal credits.

Most-requested in Edina

More HVAC services we offer

Edina HVAC questions

Who repairs furnaces and air conditioners in Edina, MN?

Central Minnesota Heating and Cooling, owned by Eric Brown and in business since 2009, serves Edina and nearby towns in Hennepin County, about 7 miles from downtown Minneapolis. We're open 7 days, 7am–9pm, and no-heat calls get priority. Call 612-429-3465.

How much does an HVAC service call cost in Edina?

An HVAC service call in Edina is a flat $79 trip charge, waived when you approve the repair. You get a written price before any work. See HVAC cost in Edina for installed prices.

Can an AC or heat pump be placed quietly on a tight Edina lot?

Yes, with planning. Start with the published sound rating of the outdoor unit, since variable-speed models spend most of their time running slower and quieter. Then choose the spot: away from a neighbor's bedroom window, on a solid pad, with the line set routed to suit the placement rather than the shortest run. On close lots, settle the location before install day.

Our rebuilt Edina house has two furnaces and two air conditioners. How should they be maintained?

As two separate systems. Each furnace needs a fall check and each air conditioner a spring check, with filters changed and condensate drains kept clear on both. A furnace or AC tune-up starts at $129, or $219 for a furnace and AC together, and we can do both systems on one visit. Maintenance plans are available on request if you would rather have both systems on a schedule. Also make sure the two thermostats are not fighting each other on spring and fall days, one heating while the other cools.

Does HVAC work in the Country Club District need heritage review?

Most doesn't. Edina requires a certificate of appropriateness for demolition, new houses and significant changes to street-facing facades, while interior work and in-kind replacements don't need one. A furnace swap is interior work, and keeping condensers and vents off the street-facing side avoids most questions. If a vent, line set or outdoor unit has to change the front of the house, check with the city's heritage preservation staff first.

We're rebuilding in Edina. How should the new house's heating and cooling be planned?

Early, before the framing plans are final. Ask for a room-by-room Manual J and a duct design, leave a mechanical room big enough to service the equipment, and plan chases for ducts to the upper floor instead of squeezing them in later. Decide on zoning or two systems, and pick condenser spots away from the neighbors' windows on a narrow lot. A new, tight house also needs balanced mechanical ventilation.

Contact Us

Heat out in Edina? Call or send a request.

Send a service request

Prefer to talk it through? Call 612-429-3465.

Call 612-429-3465Request service