Multi-Zone Mini-Split Layouts for Minnesota Homes
Laying out a multi-zone mini-split in a Minnesota home: sizing each room, one outdoor unit or two, head styles and common layouts. $4,200–$12,500 installed.
Read the guide
Ductless mini-splits in Richfield homes cost $4,200–$12,500 installed, from one room to several zones. They suit the knee-wall rooms of a story-and-a-half and additions that the original trunk duct never reached. Every job starts with a written, flat-rate quote.
The upstairs of a Richfield story-and-a-half is where a mini-split earns its place. Those rooms sit under the roof, lose heat on three sides in January, and often get one small supply or none. A single wall head can heat and cool the space without running ducts through a knee-wall attic that is hard to reach. Because airport-program houses are tighter than their age suggests, a head sized to the room, not to the whole floor, is usually enough.
Additions are the other common job. When a one-story house is expanded, the original furnace and trunk can fall short of the new square footage, and a ductless system gives the addition its own heating and cooling without reworking the old ducts. Basements are low, so we plan the line set to run through the rim joist or an exterior wall rather than through finished space. Outdoor units go on a wall bracket or a stand where narrow lots allow, away from a neighbor's bedroom window.
Updated November 10, 2026
Our $4,200–$12,500 installed price comes as a written flat-rate quote, with a 2-year labor warranty on top of the manufacturer's parts warranty. Story-and-a-halves price by the knee-wall rooms upstairs, since one wall head sized for the room beats running ducts through a hard-to-reach attic. Compare central AC vs ductless costs.
For Xcel's AC and heat pump rebates, ask whether a registered contractor is required. Rebate programs change every year, so check the utility's current terms before you buy.
Our guides: Xcel and CenterPoint rebates, heat pump rebates.
Symptom guides: Extreme cold · Uneven room temperatures · Blank thermostat · Signs a mini-split makes sense for your house
In most cases, yes. A head in the room heats and cools it without sending air through the cold knee-wall space. We check how much the roof and knee walls leak first, since sealing and insulating them helps any heating. The room then gets steady temperature even when the main furnace struggles on the coldest nights.
Sometimes. A 1950s rambler is small and open enough that one head in the living area can cool the main rooms, but bedrooms behind closed doors stay warmer and the basement gets little. Two heads, or one head plus the existing ducts, usually reach more. The floor plan decides what one head will and will not cover, and the written quote lists it.
Laying out a multi-zone mini-split in a Minnesota home: sizing each room, one outdoor unit or two, head styles and common layouts. $4,200–$12,500 installed.
Read the guideMini-split or central air? In Minnesota it turns on your ducts and heat source. Installed with us, AC runs $5,200–$9,800 and ductless $4,200–$12,500.
Read the guideSEER2 replaced SEER on January 1, 2023 under a tougher DOE test, so numbers read lower. How it's measured, Minnesota's 13.4 minimum and what to buy.
Read the guideHeat out? AC quit? Call or send a request.