Open 7 days, 7am–9pm

Serving Minneapolis, Saint Paul & 50 miles around

Furnace Replacement in Spring Park, MN

A new furnace in Spring Park runs $4,500–$9,500 installed with us, depending on efficiency and fit in a compact lakeside house. The quote is written, flat-rate and sized with a Manual J load calculation.

Request Service

We'll get back to you about this request only. Rather talk now? Call 612-429-3465.

Furnace replacements in Spring Park homes

Replacing a furnace in Spring Park is usually about fitting it in. We measure the closet or utility room, the door opening, the clearance for service and the route the vent takes to the outside. A high-efficiency furnace vents through PVC out a side wall or roof and needs a condensate drain, and on a small lot the vent has to keep its distance from windows, doors and the neighboring property. An older furnace may have a metal flue, and moving to a condensing model changes that. A mechanical permit is normally required for a furnace replacement, and the City of Spring Park lists a Permits and Licensing department with building permit forms. Gas and electric providers depend on your address, so check your bill for the utility name before you look up rebates. The written quote spells out the equipment and the venting.

Updated November 10, 2026

What affects the price of a new furnace in Spring Park?

By efficiency: 80% AFUE roughly $4,500–$6,000; 96–98% AFUE roughly $6,500–$9,500. See the furnace replacement cost guide.

Are there rebates for a new furnace in Spring Park?

Spring Park's gas and electric providers depend on your address, so look at your bill to see which utility serves you. Ask us which rebates apply when we quote. Rebate programs change every year, so check the utility's current terms before you buy.

Our guides: Xcel and CenterPoint rebates, heat pump rebates.

Furnace replacement in Spring Park: questions

Will a high-efficiency furnace fit in our small Spring Park utility room?

Usually, but we measure first. Condensing furnaces come in several cabinet sizes, and some models are made for narrow spaces. We check the opening, the clearance in front, the PVC vent route to the outside and the condensate drain. If the room is too tight, we will tell you before the quote and explain the alternatives.

Is an 80% furnace still an option for our Spring Park house?

Yes, if the existing metal flue is in good shape and the chimney path still works. An 80% furnace is roughly $4,500–$6,000 installed with us, and a 96–98% unit roughly $6,500–$9,500. The higher-efficiency unit costs more up front and uses less fuel, but it needs PVC venting and a drain, which is harder in a tight space.

Contact Us

Heat out? AC quit? Call or send a request.

Send a service request

Prefer to talk it through? Call 612-429-3465.

Call 612-429-3465Request service